| 1.Finishing |
| Nitro Cellulose and Ultra Violet curing coatings |
| |
| |
| 2.
Dimensional Tolerances |
| Slats |
| Sizes (inch) |
Width (inch) |
Length (inch) |
Thickness (inch) |
| 2ˇ¨ Smooth |
2.0ˇ¨ +/- 0. 0039ˇ¨ |
+/- 0.039ˇ¨ |
0.114ˇ¨ +/- 0.0079ˇ¨ |
|
|
|
| Bottom Rail |
| Sizes (inch) |
Width (inch) |
Length (inch) |
Thickness (inch) |
| 2ˇ¨ Trapezoid |
2.0ˇ¨ +/- 0.0039ˇ¨ |
+/-0.039ˇ¨ |
0.61ˇ¨ +/- 0.0079ˇ¨ |
| 2ˇ¨ Square |
2.0ˇ¨ +/- 0.0039ˇ¨ |
+/-0.039ˇ¨ |
0.61ˇ¨ +/- 0.0079ˇ¨ |
|
|
|
| Valance |
| Sizes (inch) |
Width (inch) |
Length (inch) |
Thickness (inch) |
| Standard |
2.5ˇ¨ +/- 0. 0039ˇ¨ |
+/-0.039ˇ¨ |
0.26ˇ¨ +/- 0.0079ˇ¨ |
| Royal |
3.25ˇ¨ +/- 0. 0039ˇ¨ |
+/-0.039ˇ¨ |
0.61ˇ¨ +/- 0.0079ˇ¨ |
|
|
| |
| |
| 3. Dimensional Straightness |
| Bow & Camber |
| Slats, Bottom Rails, Valance |
Tolerance |
| 2' ˇV 4' |
1/8ˇ¨ |
| 4.5' ˇV 6' |
3/16ˇ¨ |
| 6.5' ˇV 9' |
1/4ˇ¨ |
|
|
| |
| |
| 4.Length Mix and Packaging |
| |
| Length Mix Percentage |
Slat |
Standard Valance |
Royal Valance |
Bottom Rail |
| 3' ~ 4.5' |
40% |
40% |
40% |
40% |
| 5' ~ 6.5' |
45% |
45% |
45% |
45% |
| 7' ~ 8' |
15% |
15% |
15% |
15% |
| 9' (Finger Joint) |
100% |
100% |
100% |
100% |
| Packaging |
50 pc per box |
20 pc per box |
10 pc per box |
10 pc per box |
|
|
| |
| |
| 5.Visual Appearance |
Surface: |
Smooth, sanded and free of saw marks on all 4 sides. Eggshell, tiger stripe, and natural wood grain rises are acceptable. |
|
|
Slat Edge:Smooth and rounded.
|
|
Acceptable natural wood characteristics:
Flat knots; sugar and mineral deposit. |
|
|
| Note: 5% total defect rejection allowance applied except for bow and camber which is 15% provided that the bow and camber can be salvaged thorough ˇ§cut backˇ¨ |
